The TC1130 series of 32-bit microcontrollers are designed for use in programmable logic control (PLC) systems, high-performance motor drive systems, industrial communications devices, such as switches, hubs and routers, and consumer applications, such as setop boxes. Based on the award-winning TriCore® Unified Processor architecture, the TC1130 series extends Infineon’s well-accepted 32-bit MCU family by offering an on-chip Memory Management Unit (MMU) and Floating Point Unit (FPU), well-targeted on-chip peripherals, and a clock rate up to 150 MHz. At 200 MIPS (millions of instructions per second) the average performance of the TC1130 devices exceeds other currently available industrial MCUs by a factor of three. With a Fast Ethernet (10/100 Mbit per second) controller (TC1130 only), four CAN (Controller Area Network) nodes (TC1130 and TC1115) and a USB (Universal Serial Bus) module (TC1130 only), the TC1130 series accommodate the migration of industrial systems from specialized interface and communications architectures to standards pioneered in the computer industry. This allows to easily connected production lines to control systems and networks, as well as true real-time, deterministic operation. The integrated FPU and MMU also support the use of the increasingly popular Linux or RTAI Linux operating systems.
Features:
• High Performance 32-bit TriCore™ V1.3 CPU with 4-Stage Pipeline
• Floating Point Unit (FPU)
• Dual Issue super-scalar implementation
– MAC Instruction maximum triple issue
• Circular Buffer and bit-reverse addressing modes for DSP algorithms
• Very fast interrupt response time
• Hardware controlled context switch for task switch and interrupts
• Memory Management Unit (MMU)
• On-chip Memory
– 28-Kbyte Data Memory (SPRAM)
– 32-Kbyte Code Memory (SPRAM)
– 16-Kbyte Instruction Cache (ICACHE)
– 4-Kbyte Data Cache (DCACHE)
– 64-Kbyte SRAM Data Memory Unit (DMU)
– 16-Kbyte Boot ROM
• On-chip Bus Systems
– 64-bit High Performance Local Memory Bus (LMB) for fast access between caches and on-local memories and FPI Interface
– On-chip Flexible Peripheral Interconnect Bus (FPI) for interconnections of functional units
• DMA Controller with 8 channels for data transfer operations between peripheral units and memory locations
• Two high speed Micro Link Interfaces (MLI0/1) for controller communication and emulation
• Flexible External Bus Interface Unit (EBU) to access external data memories
• One Multifunctional General Purpose Timer Unit (GPTU) with three 32-bit timer/counters
• Two Capture and Compare units (CCU60/1) for PWM signal generation, each with
– 3-channel, 16 bit Capture and Compare unit
– 1-channel, 16 bit Compare unit
• Three Asynchronous/Synchronous Serial Channels (ASC0/1/2) with baud-rate generator, parity, framing and overrun error detection, support FIFO and IrDA data transmission
• Two High Speed Synchronous Serial Channels (SSC0/1) with programmable data length, FIFO support and shift direction
• One MultiCAN module with four CAN nodes and 128 message buffers for high efficiency data handling
• Fast Ethernet Controller with 10/100 Mbit/sec MII-Based physical devices support
• USB module with compliance to USB Specification Revision 1.1, with support for
1.5 MBaud to 12 MBaud devices
• Inter-IC (IIC) module with two physical IIC buses
• Digital I/O ports with 3.3 V I/O capabilities
• Level 2 On-chip Debug Support
• Power Management System
• Clock Generation Unit with PLL
• Maximum CPU and Bus clock frequency at 150 MHz without MMU and 120 MHz with MMU
• Ambient temperature under bias: -40° to +85°C
• P-LBGA-208 package