|
|
SAR ADC
- 12-Bit (C8051F000/1/2, C8051F005/6/7)
- 10-bit (C8051F010/1/2, C8051F015/6/7)
- ±1LSB INL; No Missing Codes
- Programmable Throughput up to 100ksps
- Up to 8 External Inputs; Programmable as Single-Ended or Differential
- Programmable Amplifier Gain: 16, 8, 4, 2, 1, 0.5
- Data Dependent Windowed Interrupt Generator
- Built-in Temperature Sensor (± 3°C)
Two 12-bit DACs
Two Analog Comparators
- Programmable Hysteresis Values
- Configurable to Generate Interrupts or Reset
Voltage Reference
- 2.4V; 15 ppm/°C
- Available on External Pin
Precision VDD Monitor/Brown-out Detector
ON-CHIP JTAG DEBUG & BOUNDARY SCAN
- On-Chip Debug Circuitry Facilitates Full Speed, Non-
- Intrusive In-System Debug (No Emulator Required!)
- Provides Breakpoints, Single Stepping, Watchpoints, Stack
- Monitor
- Inspect/Modify Memory and Registers
- Superior Performance to Emulation Systems Using ICEChips,
- Target Pods, and Sockets
- IEEE1149.1 Compliant Boundary Scan
- Low Cost Development Kit
HIGH SPEED 8051 μC CORE
- Pipelined Instruction Architecture; Executes 70% of
- Instruction Set in 1 or 2 System Clocks
- Up to 25MIPS Throughput with 25MHz Clock
- 21 Vectored Interrupt Sources
MEMORY
- 256 Bytes Internal Data RAM (F000/01/02/10/11/12)
- 2304 Bytes Internal Data RAM (F005/06/07/15/16/17)
- 32k Bytes FLASH; In-System Programmable in 512 byte
- Sectors
DIGITAL PERIPHERALS
- 4 Byte-Wide Port I/O; All are 5V tolerant
- Hardware SMBusTM (I2CTM Compatible), SPITM, and UART
- Serial Ports Available Concurrently
- Programmable 16-bit Counter/Timer Array with Five
- Capture/Compare Modules
- Four General Purpose 16-bit Counter/Timers
- Dedicated Watch-Dog Timer
- Bi-directional Reset
CLOCK SOURCES
- Internal Programmable Oscillator: 2-to-16MHz
- External Oscillator: Crystal, RC,C, or Clock
- Can Switch Between Clock Sources on-the-fly; Useful in
- Power Saving Modes
SUPPLY VOLTAGE ........................2.7V to 3.6V
- Typical Operating Current: 12.5mA @ 25MHz
- Multiple Power Saving Sleep and Shutdown Modes
64-Pin TQFP, 48-Pin TQFP, 32-Pin LQFP
Temperature Range: –40°C to +85°C |
|
|
