This powerful yet easy-to-program (only 35 single word instructions) CMOS FLASH-based 8-bit microcontroller packs Microchip´s powerful PIC® architecture into a 28 pin package.The PIC16F882 features 128 bytes of EEPROM data memory, self programming, an ICD, 2 Comparators, 11 channels of 10-bit Analog-to-Digital (A/D) converter, 1 capture/compare/PWM and 1 Enhanced capture/compare/PWM functions, a synchronous serial port that can be configured as either 3-wire Serial Peripheral Interface (SPI™) or the 2-wire Inter-Integrated Circuit (I²C™) bus and an Enhanced Universal Asynchronous Receiver Transmitter (EUSART). All of these features make it ideal for more advanced level A/D applications in automotive,
industrial, appliances or consumer applications.

Special Microcontroller Features:

• Precision Internal Oscillator:
  - Factory calibrated to ±1%
  - Software selectable frequency range of
  8 MHz to 32 kHz
  - Software tunable
  - Two-Speed Start-Up mode
  - Fail-safe clock monitoring for critical
  applications
  - Clock mode switching during operation for
  low-power operation
  
• Power-Saving Sleep mode
  
• Power-on Reset (POR)
  
• Selectable Brown-out Reset (BOR) voltage
  
• Extended Watchdog Timer (WDT) with its own
  on-chip RC oscillator for reliable operation
  
• In-Circuit Serial Programming™ (ICSP™) via two
  pins
  
• In-Circuit Debug (ICD) via two pins
  
• High-endurance Flash/EEPROM cell:
  - 100,000 erase/write cycle enhanced Flash
  program memory, typical
  - 1,000,000 erase/write cycle data EEPROM
  memory, typical
  - Data EEPROM retention > 40 years
  
• Self-reprogrammable under software control
  
• Programmable code protection
  
• Peripheral Features:
  Device Features:
  - 1 input only pin
  - 25 I/O
  - High sink/source current 25 mA
  - Interrupt-on-pin change option
  
• Timers:
  - TMR0: 8-bit timer/counter with 8-bit prescaler
  - TMR1 enhanced: 16-bit timer/counter with
  prescaler, External Gate Input mode and
  dedicated low-power 32 kHz oscillator
  - TMR2: 8-bit timer/counter with 8-bit period
  register, prescaler and postscaler
  
• Capture/Compare/PWM (CCP) module
  
• Enhanced Capture/Compare/PWM (ECCP)
  module with auto-shutdown and PWM steering
  
• Master Synchronous Serial Port (MSSP) module
  SPI™ mode, I2C™ mode with address mask
  capability
  
• Enhanced Universal Synchronous Asynchronous
  Receiver Transmitter (EUSART) module:
  - Supports RS-485, RS-232 and LIN
  compatibility
  - Auto-Baud Detect
  - Auto-wake-up on Start bit
  
• Ultra Low-Power Wake-up (ULPWU)
  Analog Features:
  
• 10-bit 11 channel Analog-to-Digital (A/D)
  Converter
  
• 2 Analog Comparator modules with:
  - Programmable on-chip Voltage Reference
  (CVREF) module (% of VDD)
  - Fixed 0.6 Vref
  - Comparator inputs and outputs externally
  accessible
  - SR Latch mode