The S08MP16 is a low cost 8-bit MCU that delivers Safe, Accurate and Inexpensive Motor Control for a wide speed range of Industrial and Automotive applications. An ideal entry-level solution for Brushless DC (BLDC) motor applications it features an 8 channel PWM/Flextimer module providing hardware dead-time insertion, Analogue Comparators, Programmable Gain Amplifier, and a 12-bit ADC with PWM hardware triggering. Also offered is an Independently Clocked COP & Cyclic Redundancy Check (CRC) Engine providing clock failure protection & memory content validation for safety-critical applications implementing IEC60730.

Features.

• Up to 50MHz HCS08 CPU core (40MHz for Automotive)
• 2.7 to 5.5V operating voltage
• 16KB Flash, 1KB RAM
• Motor Control Dedicated 1x 2-ch + 1x 6ch FlexTimer
• 3x High Speed Analogue Comparators
• Programmable Gain Amplifier
• 2x Programmable Delay Blocks
• 13ch, 12-bit ADC with 2.5μs conversion time
• 28SOIC, 32LQFP, 48LQFP packages
• 40°C to 105°C for industrial and up to 125°C for automotive (48LQFP only)
• Single-wire Background Debug Interface and ICE debug module

Target Applications.

• Industrial drives/fans/pumps
• HVAC systems
• Actuator systems
• Medical equipment (infusion pumps, respirators, analyzers)
• Office Equipment
• Small appliance/personal care (food processors, shavers)
• Automotive electrical fuel pump
• Automotive window lift
• Automotive fan control
• Automotive high-brightness LEDs