The TWR-K60N512 is a Tower Controller Module compatible with the Freescale Tower System. It can function as a stand-alone, low-cost platform for the evaluation of the Kinetis K10, K20 and K60 family of microcontroller (MCU) devices.

The TWR-K60N512 features the Kinetis K60 low-power microcontroller based on the ARM® Cortex™-M4 architecture with USB 2.0 full-speed OTG controller and 10/100 Mbps Ethernet MAC.

The TWR-K60N512 is available as a stand-alone product or as a kit (TWR-K60N512-KIT) with the Tower Elevator Modules (TWR-ELEV) and the Tower Serial Module (TWR-SER). The TWR-K60N512 can also be combined with other Freescale Tower peripheral modules to create development platforms for a wide variety of applications.

The TWR-K60N512 contents include:

• TWR-K60N512 board assembly

• 3ft USB cable

• Interactive DVD with software installers and documentation

• Quick Start Guide

Features

The following list summarizes the features of the TWR-K60N512

• Tower MCU Module: Tower compatible microcontroller module
• MK60N512VMD100: K60N512 in a 144 MAPBGA with 100MHz operation
• Touch Tower Plug-in Socket
• General purpose Tower Plug-in (TWRPI) socket
• On-board JTAG debug circuit (OSJTAG) with virtual serial port
• Three axis accelerometer (MMA7660)
• Four (4) user-controllable LEDs
• Four (4) capacitive touch pads
• Two (2) user pushbutton switches
• Potentiometer
• Battery Holder for 20mm lithium battery (e.g. 2032, 2025)
• SD Card slot