21embed - Toolsdev - 嵌入式开发者网

NXP LPC2138目标板

NXP LPC2138目标板是面向基于NXP ARM7TDMI-S的LPC2138微控制器的一套评估和开发系统。ITLPC2138工具包由一根USB电缆和一块目标板组成，目标板上安装有：
NXP LPC2138 CPU、最少的外设、JTAG调试接口、ETM跟踪接口以及板上集成的iSYSTEM调试器。
用户可以使用板上集成的iSYSTEM调试器来编写和调试应用程序，该调试器通过USB接线连接到PC。这块板不需要外部电源，它使用PC USB端口来供电。
除了板上集成的调试器之外，也可以选择使用外部ARM7TDMI-S调试器（包括ETM等支持）来进行调试。

Evaluation Board for LPC213x

OM10045 Evaluation Board introduces you to the NXP LPC2100 family of ARM processors and allows you to create and test working programs for this advanced architecture. Two CAN and two serial interfaces are available.

EDGE编译器

每个嵌入式开发人员都需要编译器工具包——也就是采用C、C++和汇编语言源代码的一套工具，并且能够执行所有的处理以生成最终的二进制镜像。

EDGE Compiler是完整的代码开发解决方案，专门针对嵌入式开发人员的需求而设计。它所提供的各种各样的代码生成和优化设置可以用来对编译后的代码进行精细调节，以满足特定需求。

ARM的LC-500 JTAG仿真器

LC-500代表了American Arium最受欢迎的JTAG仿真器，这些仿真器面向那些使用ARM7™, ARM9™、ARM11™、ARM Cortex™、XScale和TI OMAP™处理器的目标系统。采用ARM®技术的LC-500承担了许多之前由调试器执行的功能。该仿真器通过直观的步进功能提供了可靠的运行控制。它的设计着眼点也是速度，它能够快速地下载文件和映像，以及快速地通过代码执行步进。

ULINK2 USB-JTAG Adapter

ULINK2 USB-JTAG Adapter connects your PCs USB port to your target hardware (via JTAG, SWD, or OCDS) and allows you to debug embedded programs running on target hardware.

J-Link JTAG

ARM/Cortex Emulator, includes a USB cable, and a 20-pin JTAG/SWD ribbon cable for ARM/Cortex devices. No power supply required (driven and powered through USB).

CMX-Tiny+ RTOS

对于那些在处理器的硅衬底上嵌入有少量RAM的处理器而言（最少512字节，或者更多），CMX-Tiny+实时、抢占式多任务操作系统是一种非常“精简”的内核。这种专门设计的RTOS可以让用户开发的应用程序代码运行在RTOS之下，而且只需要使用处理器所提供的板上RAM！无论处理器是否支持使用外部RAM，CMXTiny+都不需要任何外部RAM。

大多数情况下，CMX-Tiny+都允许处理器的板上ROM支持用户的应用程序代码和CMX-Tiny+代码。这种独特的RTOS基于流行的CMX-RTX的精简版本，保留了CMX-RTX的大部分功能以及使用更加频繁的功能。

CMX-RTX，抢占式、多任务RTOS

CMX系统CMX-RTX是一个真正的抢占式、多任务实时操作系统（RTOS），它支持各种各样的处理器架构。这个“精简”的RTOS提供了当今市场上最少的资源占用、最快的上下文切换时间以及最短的中断处理延迟时间。

smx® Real Time Kernel for ARM and Cortex

The Benefits of smxARM, the version of smx designed for the ARM and Cortex processor families, include:

Reduced development schedule and cost
Lower product cost
Cost effective—buy only what is needed
Fast start, integrated solution
No device drivers to write
High success rate
Future needs are covered

Prices start at $7,500.

Evaluation kits are available at www.smxRTOS.com/eval

SMX.Blaze™

SMX.Blaze offers networking and multitasking in a low-cost, integrated package for embedded systems. Multitasking allows the networking and application portions to operate independently, thus making design easier. To enhance project success further, SMX.Blaze provides processor-specific BSP and startup code and tool-specific project and help files.

SMX.Blaze supports ARM, Cortex, ColdFire, PowerPC, and x86 processors.

SMX.Blaze includes smx® kernel, smxNS TCP/IP stack, ethernet driver or PPP, and smxBSP Board Support Package.

Prices start at $15,000.

Evaluation kits are available at www.smxRTOS.com/eval

embOS (Real Time Operating System)

embOS is a real time operating system for embedded applications designed to offer the benefits of a fully featured multitasking system, even for hard real time applications using minimal resources.

IAR visualSTATE

IAR visualSTATE is a UML-compliant graphical state machine design tool for embedded systems. It provides advanced verification and validation tools and generates very compact C code that is 100% consistent with your system design.

IAR visualSTATE is an ideal design, test and code generation tool for real-time systems with many concurrent and interrelated processes or execution threads.

J-Flash

Software to program EEPROM and flash chips in ARM systems. You will benefit from six months of free email support from the time that this product is ordered. The J-Flash ARM software is delivered electronically within one business day from the time of purchase to the email address supplied at checkout.

J-Link RDI

RDI interface for the J-Link ARM. You will benefit from six months of free email support from the time that this product is ordered. The J-Link RDI software is delivered electronically within one business day from the time of purchase to the email address supplied at checkout.

J-Link GDB Server

The J-Link GDB Server is a remote server for the GNU Project Debugger. You will benefit from six months of free email support from the time that this product is ordered. The J-Link GDB Server software is delivered electronically within one business day from the time of purchase to the email address supplied at checkout.

J-Link Flash Download

J-Link comes with a set of flash loaders which permits the download of your application directly into the flash memory of your target system from your development environment. The J-Link flash loaders are highly optimized for fast flash programming and the feature itself is optimized to make it as simple as possible to use it. Moreover the flash download feature of J-Link can be used free of charge.

Java Board Test

Combining your JTAG interface, the free Eclipse Development Environment, the free JUnit testing software and following the free instructions here ... gives you a powerful test environment.

赫斯特商业媒体：

制造商：

赫斯特商业媒体：

制 造 商：

制造商：